Introduction: Make Jumpy Flying Creepy Crawlies
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: You Will Need...
You'll need a zeebeez toy( you can get that at any toy store) a bamboo skewer, scissors, blue tack, glue gun, pen, coloring pens or pencils, paper
Step 2: Step 1
Put your bamboo skewer beside the zeebee
Step 3: Step 2
use your pen, mark on the skewer at around 1cm above the zeebeez
Step 4: Step 3
Cut the skewer from the marked point
Step 5: Step 4
Glue the skewer on the ROUND YELLOW thing of the inside of the zeebeez
Step 6: Step 5
While waiting for the glue to dry, lets draw the creepy crawlies, I'm going to draw a wasp.
start by sketching the outlines, then coloring in.
Step 7: Step 6
cut your creepy crawly out
Step 8: Step 7
Stick blue tack on the back of the creepy crawly, and then stick it to the other end of the skewer:)
Step 9: Step 8
Now try out your jumpy flying creepy crawly,
Bend the zeebeez backwards, spin and drop it on the ground, the zeebeez will bounce and fly up again!
And you are done!
thanks for reading this instructable and good luck to scaring your friends and families:)
Participated in the
Hurricane Lasers Contest