Make Your Cool Key Ring Pendant From Dead CPUs

3,628

15

1

Introduction: Make Your Cool Key Ring Pendant From Dead CPUs

When a CPU finally turned out no use, we can make it alive again by methods introduced here.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: What You Need.

1.A dead cpu. It will always be fine if you'd like to deconstruct a new one.
2.Tools which can make things easier, like a knife.
3.Drill machine (Optional,not necessary if your dead CPU has a hole already).
4.A key ring.

Step 2: Take Apart the CPU.

All the thing you have to do to make this cool key ring pendant is to take apart the cpu and drill a hole on one of the corner. If you have a laser cutter you can also draw something on the key ring such as QR Code.
Just use your knife to remove the copper plate patiently. Alsays remind yourself not to cut yourself.

Step 3: Drill a Hole

In this step, I had some trouble drilling with the machine, but it will be really easy if you have a better drill machine rather than this one from lab.

Step 4: OUCH.

Sorry for my poor English.

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Arduino Contest 2020

      Arduino Contest 2020

    Discussions