Make Your Own ESC/Servo Tester

Introduction: Make Your Own ESC/Servo Tester

About: Awesome Electronics Tutorials, Projects and How To´s

In this small project I will show you how to build a custom ESC/Servo Tester. Along the way I will show you how to setup the timer of the ATmega328P in order to create the required control signal. At the end I will then add tactile switches, a potentiometer and an LCD to adjust the control signal easily. Let's get started!

Step 1: Watch the Video!

The video gives you all the information you need to create your own ESC/Servo Tester. During the next steps though, I will present you some additional information.

Step 2: Order the Components!

Step 3: Build the Circuit!

Here you can find the schematic of the circuit, as well as reference pictures of my finished board.

Step 4: Upload the Code!

Here you can download the code for the ESC Tester, as well as the I2C LCD library which you need to include in your Arduino folder before uploading the code!

Step 5: Success!

You did it! You just created your own ESC/Servo Tester!

Feel free to check out my YouTube channel for more awesome projects:
http://www.youtube.com/user/greatscottlab

You can also follow me on Facebook, Twitter and Google+ for news about upcoming projects and behind the scenes information:

https://twitter.com/GreatScottLab

https://www.facebook.com/greatscottlab

2 People Made This Project!

Recommendations

  • Puzzles Speed Challenge

    Puzzles Speed Challenge
  • "Can't Touch This" Family Contest

    "Can't Touch This" Family Contest
  • CNC Contest 2020

    CNC Contest 2020

3 Discussions

0
BkE2
BkE2

6 months ago

Where is schematic?

0
einarjorgen.hansson
einarjorgen.hansson

Question 10 months ago on Step 3

Hi, I was wondering if you could upload a better picture of the schematic?