A Vibrabot from old household stuff.
Step 1: Things You Need
Things you need.
(1) vibrating motor (2) battery (3) cello tap (4) steel wire (5) old capacitor from old circuit (only for base no need to working)
Step 2: Make Legs
To make legs of Vibrabot you will need steel wire.
First cut down steel wire then make small loop at end of wire.
Make 4 legs.
Step 3: Attach Legs on Capacitor
To attach legs on the capacitor make a hole under the capacitor.
Then attach them following directed in image.
(Note : make sure that hole is on center)
Step 4: Attach Motor and Battery on Bot
Attach moter and battery on bot with use of cello tap.
Step 5: Final Product
If you like my project then follow me on instructables or you can add me as a friend on facebook my facebook id is on my instructables profile info.