Making Custom Trailer Axle Components

About: MSFN is "Makin Sumthin from Nuthin", I suggest you do the same! Basically I take inventory of what I have laying around that most likely cost me nothing, and building something useful and fully functional ou...

Please Click The Play Button On The Above Video to Watch

Machining Custom Trailer Axle Components for a customer to bring to Cuba to fabricate a trailer. Machined parts are not that readily accessible in Cuba so were turned here and to be flown down and assembled on-site. Spindles turned from 1.25” diameter 1018 CRS. Bushings turned from 3” diameter 1018 Cold Rolled Steel (CRS) on the Atlas 12” Lathe. Boring Bar and Drills courtesy of my generous subscribers, y’all ROCK! :)

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Tape Contest

      Tape Contest
    • Trash to Treasure

      Trash to Treasure

    Discussions

    0
    None
    Swansong

    2 years ago

    Hello there!

    We're glad you want to share something with the Instructables community!

    And we’re here to help you out.

    In order to be published live on the site, Instructables must consist of the following things:

    - Multiple steps showing how you made your project

    - Written instructions in each step

    - Your own original images

    Beyond making your Instructable simply publishable, this guide (https://www.instructables.com/id/How-to-Create-a-Feature-Worthy-Instructable/) explains what is required to have your Instructables featured by our site editors. It’s very helpful, and definitely worth checking out.

    We would love to review your project again after you have made the necessary edits, and we will publish your project if it is eligible.

    If you have any questions, please feel free to ask right here!

    Best,

    Instructables Community Manager