So Ide got my dream car , but I wanted to add a little personal touch so I decided to make. A mini bobble head for my dash.
Step 1: Tools and Materials
For this project you wil need a drill , screw driver , a screw a small spring a small washer and obviously a match box car.
Step 2: Drill Hole
Drill screw sized hole in the center of the car.
Step 3: Assemble Spring
Squeeze the washer into the bottom of the spring and drop the screw through.
Step 4: Attach Spring to Car
Screw the screw into the car. Don't over tighten as you may crack the plastic.
Step 5: Done
My mini has screws that hold they dash in place so I just forced the spring under it to hold it in place