Mechanoid,3d Print

About: https://twitter.com/3dYoda https://www.facebook.com/yoda3dprint/?ref=bookmarks

Here is my model "mechanoid"

- I modeled this robot using a software3d, printed with a printer3d dagoma discovery 200, then painted with acrylic.


Step 1: Modeling

the model is composed of 5 parts (legs, torso, head, 2 arms),Export to stl format.

Step 2: ​3D PRINT

Printed with dagoma discovery 200 with these parameters:

-head: x: 31.21y : 37.07 mm z: 41.32 mm .layer thickness: 0.10mm -support for printing -time: 2h09min

- bust: x: 60.19 mm y: 42.45 mm z: 65.59 mm .layer thickness: 0.15mm .support for printing.time: 3h38min

-Legs: x: 60.19 mm y: 42.45 mm z: 65.59 mm .layer thickness: 0.15mm .support for printing.time: 3h38min 2

-arms: x: y 29.07 mm: 19.07 mm z: 81.52 mm .layer thickness: 0.10mm .support for printing.time: 1h52min

Step 3: ​Painting

: Acrylic paint, varnish.the 5 parts of the character were glued together

Step 4: LINK

STL: https://moon-station.mechamoon.com/index.php/produit/mechanoid/

Share

    Recommendations

    • Sweet Treats Challenge

      Sweet Treats Challenge
    • Build a Tool Contest

      Build a Tool Contest
    • Epilog X Contest

      Epilog X Contest

    3 Discussions

    0
    None
    OlivierA4

    2 years ago

    hé hé salut Yoda c'est fly, j'ai voté

    Ps : j ai quitté le forum désolé de ne pas t'avoir prévenu

    2 replies
    0
    None
    yoda3dOlivierA4

    Reply 2 years ago

    salut,merci!!
    bah oui,j'ai vu ça,comment ça se fait,t'a vendu ta disco:)?

    0
    None
    OlivierA4yoda3d

    Reply 2 years ago

    non je supporte plus le bashing ,la mauvaise fois et le pauvre mec dyslexique qui c'est fait à moitié insulté sur le post de la vidéo, j'ai demandé a Matc de supprimé mon compte