Micro BM

2,984

4

32

About: You can find me over on Knexflux! https://knexflux.net

This is a very small ball machine I made some time ago. This ball machine can carry up to 6 balls!!!!!!!!!!!!!!!!
If you have any questions then feel free to ask!

Step 1: Piece Count


Rods
green - 10
white - 8
blue - 27
yellow - 2
red - 4
Total Rods: 50

Connectors
dark grey - 1
light grey - 2
orange - 11
red - 6
green - 9
yellow - 4
blue 3D - 4
purple 3D - 8
Total Connectors: 45

Other
blue spacer - 10
grey spacer - 8
y-connector - 4
tan-clip - 1
Total Other: 23

Grand Total: 118


Step 2: The Base


First make the base.

Step 3: Turning Rod


Time to make the rod that turns!

Step 4: The Motor

Now add the motor. you can also use a different motor, but you'll have to invent that part then on youre own, and make sure that it turns the right direction.

Step 5: The Entrence Track+the Shaft


Step 6: Exit Track+connection


Share

    Recommendations

    • Holiday Decor

      Holiday Decor
    • Toys Contest

      Toys Contest
    • PCB Contest

      PCB Contest

    32 Discussions

    0
    None
    random_builder

    1 year ago

    This is really cool! Lemme check........and this is the ball machine that uses the least amount of pieces! Great job!

    0
    None
    The CannoneerSorunome

    Reply 6 years ago on Introduction

    yeah...you had better sharez ze cookiez or Im gonna get reeeeeeaaaaaaaaaaaaallllllllllllllllyyyyyyyyyyy HUUUUUUUUUNNNNNNNNGGGGRYYY