Introduction: Micro Uzi
V.2 IS HERE>>>> https://www.instructables.com/id/Micro-UziV20/ <<<<
READ BEFORE YOU RATE
Okay, to start off with, this is my second attempt at a Uzi(The first one being my first gun posted).
Its still basically a rough draft, the trigger needs stengthening, but so far,
THIS IS THE FIRST GUN ON THE SITE to have a trigger blocking behind the handle, and a removable magazine in the handle. I haven't finished the triggerguard yet, and the same with a lot of other things, but the mech is working fine. Now to the Pros and Cons.
Removable magazine in the handle.
True trigger blocks behind the handle.
Looks a lot like the real thing(if you object, tell me what to fix.)
Inaccurate-I know thats usually a con, but I put all these little bumps inside the barrel, so its realistic.
Realistic-removable magazine in the handle, and its innacurate. It looks like it too.
Good mag capacity(20)
No modded pieces.
A lot of fun!
Extremely uncomfy handle-I don't want to mod the pieces, but it has 3 blue rods sticking into your hand. Help appreciated.
Shoots green rods.
Not the sturdiest.
If this by any chance gets 4+, then I will definitely post.
If 5 people ask me to post, then I will fix everything up (eg. triggerguard, fake stock, trigger)
and then post the V2.
Thanks for reading, don't forget to comment, subscribe and rate!
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.