Mini Bow and Arrow

6,460

7

4

Introduction: Mini Bow and Arrow

 This Intractable will show you how to build your own mini bow and arrow like this one:

Step 1: Supplies

 The supplies you will need are listed below:

paper clips
duck tape
needle nose pliers
ruler
scissors
inside of a pen
rubber band
screw

Step 2: First

 Bend a paper clip like the one in the picture.

Step 3: Second

 Make sure that the paper clip bend is 3 in. long.

Step 4: Third

 Cut a rubber band like the one in the picture.

Step 5: Fourth

 Cut the rubber band so that it is about 3 1/2 in. long.

Step 6: Fifth

 Bend the ends of the paper clip over the ends of the rubber band with the needle nose pliers.

Step 7: Sixth

 Cut 2 thin strands of duck tape.

Step 8: Seventh

Take a screw and duck tape it like the one in the picture (with the 2 thin strips of duck tape) 

Step 9: Your Done!

 Now you can shoot the inside of the pen!

Be the First to Share

    Recommendations

    • Lighting Challenge

      Lighting Challenge
    • Metalworking Contest

      Metalworking Contest
    • Puzzles Speed Challenge

      Puzzles Speed Challenge

    4 Discussions

    0
    sarahgee
    sarahgee

    3 years ago

    this looks like a fun project

    0
    CaseBoy
    CaseBoy

    10 years ago on Step 4

     umm. I think you mean cut the rubber band

    0
    DBMods
    DBMods

    Reply 10 years ago on Step 4

    yes i do mean on the rubber band

    0
    lemonie
    lemonie

    10 years ago on Introduction

    With a bow, the energy comes from the bow material bending - the string is pretty much inelastic. This would be a slingshot of sorts.

    L