Mini Catapult

1,778

43

2

Introduction: Mini Catapult

About: https://twitter.com/3dYoda https://www.facebook.com/yoda3dprint/?ref=bookmarks

-Here is my mini catapult; The perfect accessory for ejecting your peas away from your plate.

(Modeled in a software3d and then print with a 3d printer)

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: ​Equipment:

Equipment:

-The stl file

-A 3d printer

-An elastic

Step 2: 3d Modeling

The catapult is modeled in 3 parts, then exported, in stl format.

Step 3: 3D PRINTING

Printed with dagoma discovey 200 With these parameters:

part1:

x:78.40mm

y:69.81mm

z:158.64mm

layer thickness:0.20mm

Support: yes

Filling: full

time:2H30min

part2:

x:94.63mm

y:80.21mm

z:17.04mm

layer thickness:0.15mm

Support: YES

Filling: full

time:58MIN

part3(x2):
x:14.62mm

y:14.54mm

z:3.95mm

layer thickness:0.10mm

Support: no

Filling: full

time:5 min

Step 4: Assembly

-The pieces are then assembled together. Parts fixed with glue.

I place then the rubber band

Step 5: Link

STL: https://moon-station.mechamoon.com/index.php/produit/mini-catapulte/

Design Now: 3D Design Contest 2016

Participated in the
Design Now: 3D Design Contest 2016

Epilog Contest 8

Participated in the
Epilog Contest 8

Glue Challenge 2016

Participated in the
Glue Challenge 2016

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    2 Discussions

    0
    eggert
    eggert

    3 years ago

    A pay only stl? I'm not sure, if I should flag this as spam... But
    anyway, any one who wants to build something like this should search on
    thingiverse for catapult...

    0
    yoda3d
    yoda3d

    Reply 3 years ago

    I asked the question to "instuctable":

    answer:
    "Hello,

    Yeah, you can share those links with your readers.

    Troy (tomatoskins)"