Introduction: Mini Coffee Shop
A quarantine project inspired by DIY mini houses. In this project, I tried to make the physical model have a texture that the digital one, that's why a problem occurred since my filament was limited.
The total print hours for all projects is approximately 11 hours. Using medium quality.
Desing Link : Tinkercad.
Supplies
3D printer.
2D printer.
White, brown, wood, black and yellow filament.
contact glue
hot glue.
Color papers.
Step 1: Base.
Cut one piece of polystyrene and three of cardboard, two of the same size and one for the step.
glue them and line them with wood prints.
polystyrene size: 85mmx140mm.
cardboard size:100mmx100mm.
Step 2: Walls, Door and Windows.
Glue all the piezes with hot glue.
Step 3: Planter
Glue a green pieze of paper in the planter and glue it in the floor.
Step 4: Sing and Awning.
Assemble sing and stick it on top of the front likewise with the awning.
Step 5: Armchair.
Assemble and place at the bottom
Step 6: Counter.
Cut the paper in square piezes and stick it to the white part, glue the other piezes and place it.
Step 7: Shelves and Blackboard
stick all the pieces on the walls.
Step 8: Books and Frame.
Print book covers and stick them to the pieces , place them and ready.
Step 9: Jars
Cut piezes of papers and stick them.
Step 10: Coffee Machine.
Stick all the piezes and place it in the counter.
Step 11: Stool.
stik them and place it next to the counter.
Step 12: Ceiling and Lamps.
Stick all the parts and place it in the right top. you can put led´s in it.
Step 13: Ready
Your mini coffee shop is finished, you can find mistakes because i am not very good at english.
Runner Up in the
Tinkercad Student Design Contest