All the steps you need to know about making a mini guitar on tinker cad.
Step 1: The Materials
These are the materials needed for the mini guitar.
- Nine cylinders
- four boxes
- one sphere
Step 2: Putting Things Together
Pair the cylinder and sphere together so that it looks like the following.
Step 3: Building the Bass of the Guitar
Pair the following Items but remember to whole the side cylinders.
Step 4: Continue of the Construction of the Bass
Add two cylinders on the top of the bass that are the same size. Adjust until they fit correctly.
Step 5: Finishing of the Bass
Step 6: The Neck of the Guitar
add the wholed cylinder on the bottom of the neck of the guitar.
Step 7: Finishing Touch
Now you can finally group the bass of the guitar so that it looks like this.
Step 8: The End
Now finally add the neck of the guitar onto the bass. Your also going to need to put the cylinder in the center of the bass.