Introduction: Mini Paper Airplane Glider: Raptor, Version 1.0
UPDATE!!! Cut one box at the tail of the plane so it won't stall!
Step 1: Design
I used .5cm by .5cm graph paper. Follow design. Dotted lines are folds and solid lines are cut. I used my pocket knife to cut but, you can use an x-acto knife.
Step 2: What You Need
X-acto knife or scissors
Glue- preferably super glue since it is easier to dispense
Step 4: Add Ailerons
Step 5: Enjoy!
Oh and don't forget to staple the nose! Please like, comment or follow!