I got the idea from another instructable. I thought a mini version would be great. This is my first instructable.

Step 1: Materials:

You will need:
duct tape or colored plastic tape
scissors
one of those fridge magnets you can get in the telephone book

Step 2: Cut!

Cut 2 pieces of magnet each a bit more than an inch long and about 3 eighths of an inch wide.

Step 3: Tape!

Place the pieces on the tape as shown in the picture. Before you do this if you want, pull the paper off the magnet to give the tape a nicer surface to stick to. Do not pull the entire layer of paper off.

Step 4: Cut Again!

Cut so the piece of tape with the magnets is no longer attached to the roll.

Step 5: Fold!

Fold the tape in half along the line of space you have left in between the magnets. Crease along the edges of the magnets that are now inside the tape.

Step 6: Trim!

Trim the extra tape off along the edges of the creases. Then open it up, trim some more if you missed any spots on the sides, and cut a very small piece of tape to go on the sticky spot in the middle. Close it up to make sure the magnets are sticking together.