Mirror Wiper

Introduction: Mirror Wiper

Many people are troubled by the fog in the bathroom mirror at home. Every time they take a shower, there is a thick layer of mist on the mirror. After wiping it off with a rag, it will fog again and it will not reach the mirror. In the case of rain and wet weather, there will be a mist on the mirror, rubbed with your hands, and the more blurred it is, the more it affects us. How can we solve this problem? WITH THIS MIRROR WIPER!!!

Step 1: Supplies

- Breadboard x1

- Arduino distance sensor x1

- Arduino Servo motor x1

- Wire x9

- Hot melt adhesive x1

- eyeglass cleaning cloth

- Cardboard (I used Pizza cardboard)

- Any transparent board x1 (acrylic sheet or glass)

- Popsicle stick x1

- 3M 860 Scotch efficient soil

Step 2: Breadboard

Step 3: Rod to Clean the Mirror

Step 1: Cut the eyeglass cleaning cloth into half

Step 2: Surrounded eyeglasses cleaning cloth with popsicle sticks

Step 3: Use 3M 860 Scotch efficient soil to stick the popsicle stick wrapped in glasses cloth to the Servo motor

Step 4: Code

Copy the code into your Arduino program

When you put your hand in front of the sensor the Rod would move.

Sensors Contest

Participated in the
Sensors Contest

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • "Can't Touch This" Family Contest

      "Can't Touch This" Family Contest
    • CNC Contest 2020

      CNC Contest 2020

    Discussions