Movable WiFi Scanner

Introduction: Movable WiFi Scanner

D-duino is a low cost but useful IOT platform.

Today I will introduce how to make a movable WiFi scanner by LUA language.

Step 1: Prepare

Step 2: Programming

It is a little complex.

I suggest you have a look at this project first : NodeMCU

Go to here to customize your own firmware.

Then you can see here to know how to burn firmware into D-duino.

I put my code on my github:

https://github.com/lspoplove/D-duino/blob/master/L...

Using Esplorer tool to write LUA is a good choice.

LUA is as simple as Arduino.

Please have a fun!

IoT Builders Contest

Participated in the
IoT Builders Contest

Circuits Contest 2016

Participated in the
Circuits Contest 2016

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Audio Challenge 2020

      Audio Challenge 2020
    • Maps Challenge

      Maps Challenge

    2 Discussions

    0
    Razanur
    Razanur

    3 years ago

    Hi! Thank you for posting!
    Before reading into the code, I'd like to know, what kind of WIFI scanner this is. Does it scan for a certain list of known networks, open networks, ... ? The screen seems to display only information for one very specific network.

    0
    lspoplove
    lspoplove

    Reply 3 years ago

    It scans all available WiFi around you.