My Recon CS-6/M16

About: I am a kid who is upsessed with NERF, airsoft, BB guns, real guns, and paintball. I play and mod NERF everyday. I am Chinese. I live in California. I love art. I draw something about Halo every math period i...

  I made this handle for my recon from the deploy and now it looks like a M16. I got this idea from my other successful mod "My FuryFire REV-10" Because my deploy broke and I mount a stock on my furyfire and now I want to mount a handle on my recon. You know how the sight that comes with the recon how it "sucks' well, this SCOPE will probably "suck", but it has a handle so...I can climb trees easily, cock it easily, and it looks like a M16.   M16-a American rifle that can be put on semi-automatic or automatic that also shoots a ball point projectile.   I did this by using a hand drill to drill 4 holes and screwed the handle in just how I did with the FuryFire mod. But I had to saw the handle off the blaster.

  For the people who want to try this, you will need the following:

The Recon CS-6

The Deploy CS-6 (broken)

A hand drill(not a electric drill because you'll break the blaster)

A screw driver

Some screws(any size, as long as their not too big)

And a hack saw(or any saw)

  First you'll need to saw the rail off. Second, you'll need to drill four holes on the handle and four on the Recon. Third, screw in the screws (make sure they fit). Finally, have fun and make it doesn't fly off.


Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share


    • Made with Math Contest

      Made with Math Contest
    • Cardboard Speed Challenge

      Cardboard Speed Challenge
    • Multi-Discipline Contest

      Multi-Discipline Contest

    11 Discussions

    lil larrykve23

    Reply 8 years ago on Introduction

    Well, do you know of the new gun called "spectre rev-5"? It's only sold at Walmart and I bought it and it comes with a folding stock and a barrel extention that looks like a silencer and I put both those things on it.

    kve23lil larry

    Reply 8 years ago on Introduction

    and about those screws holding the carrying handle on. my deploy cs6 doesnt have those little screws

    lil larrykve23

    Reply 8 years ago on Introduction

    I got the screws off other guns I messed up and then I drilled holes in the handle. The handle is from the Deploy CS-6. I sawed it off then drilled the holes. I also drilled holes on the gun. I screwed in the screws and then screwed the screws into the gun. Now it looks like a M16. Got it?

    lil larry

    8 years ago on Introduction

    I know, but I don't have money to get paint right now.

    Good suggestion though