Namlem "Chin-cock" K'nex Assult Rifle.

2,132

13

Intro: Namlem "Chin-cock" K'nex Assult Rifle.

This is an original gun, but it's based largely on Perfect Duck's Red impact. It's called the "Chin-cock" because you can cock it with your chin. You don't have to, it's just sort of a gimmick.

It's a poerfull, accurate gun with a trigger system that I'm pretty sure is new and original. I call it the "twist trigger."

Step 1: Barrel and Chamber

Ok, here's the barrel and the bullet chamber. You're going to need a lot of tan pieces, but if you're short, you might be able to manage if you just put one or two extra blue spacers in between each one. That isn't really recommended though.

Step 2: Hopper

the hopper is really simple. Sorry that I forgot to take a pic of the hopper without ammo.

Step 3: Ram, Spring, and Back Section

You're going to need a good spring that is about the length of a yellow rod, give or take a little.

Step 4: Firing Pin

Easy.

Step 5: Twist Trigger

here's the trigger-type thing. I call it a twist trigger.

Step 6: Final Steps

Now you just put the two parts together and then put the reinforcing parts on.

Share

    Recommendations

    • Halloween Contest 2018

      Halloween Contest 2018
    • Furniture Contest 2018

      Furniture Contest 2018
    • Audio Contest 2018

      Audio Contest 2018

    13 Discussions

    0
    None
    dynno97

    9 years ago on Introduction

    I will give it 4 stars cause it was one of the early guns

    why would you "cock" with your chin. because if you did you couldnt have much power out of it.

    0
    None
    Rage

    11 years ago on Introduction

    interesting, however it is still a basic mechanism, without any realy fancy looks to it. non the less, great instructable.

    0
    None
    mmzdaniel

    11 years ago on Introduction

    its nice... just to inform you all the gatlings on the site use this trigger...

    0
    None
    knexster

    11 years ago on Introduction

    Looks cool, i dont understand the trigger though. Is the auto-load hopper style or is it like stacking rods in a perfect tower? Nice gun 8/10

    1 reply
    0
    None
    Namlemknexster

    Reply 11 years ago on Introduction

    It's just a regular hopper. There is some width to it and the rods don't stack perfectly. The trigger is pretty simple and easy to figure out when you build it. You just push the back end of the trigger to the left, twisting it.

    0
    None
    smidge147

    11 years ago on Introduction

    that is so cheap!but still creative.OFFICIAL FIRST COMMENT fobble wobble ur dont count as theres no actual comment.!ha!first comment