Place: Banjarapalya E4D Makerspace
DC motor with fan
Black colour paint
Brown dog solar
Hot glue gun
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Plan the Circuit
Take a paper and plan the project, how to make yourself (DIY) and what what items will you need.
Step 2: Take a Bottle
First take the water bottle and cut it middle place of the bottle with the scissor or saw blade.
Step 3: Take a Cardboard
Take the bottle piece and put it on cardboard and mark it with marker, and cut it round shape
and cut the cardboard and take a black color paint and paint it to the cardboard, and wait still it dry.
Step 4: Fix the Motor
Take a cardboard and whole it for motor, how much motor will takes the place, and
fix it inside the bottle with the help of hot glue gun and fix the motor with fan, to the cardboard
and fix it with Hot glue gun.
Step 5: Decorate the Project
Take the ribbon tape and fix it around to the bottle, and first fix it with feviquick and roll it around the bottle
then take another painted cardboard, and make it two wholes for motor wires. then fix it under the project
with the help of hot glue gun.
Step 6: Connect to the Brown Dog Solar
Take the motor wires and connect to the brown dog solar wires, then the solar nano fan is ready.