Nerf Crossfire Mod

10,715

7

18

Introduction: Nerf Crossfire Mod

About: I absolutly love airplanes and just about anything with an airfoil. I own 6 Chickens and love inventing and building stuff.

This is a mod for the Nerf Crossfire! Mine Shot far but I think I could make it shoot farther, and it worked!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

This is the materials list:
1 Nerf crossfire
2 Pennies; 3!
3 Screwdriver

(this is my first instructable!)

Step 2:

Take out ALL of the screws, there will be 2 mini screws also, put them in a separate pile, and what ever you do, DONT LOSE THEM!!!!! (take the thing that you cock it with off then do the rest!)

Step 3:

 Ok so take the top off VERRRYYY CARRFFUULLLYY.Now, take the compresser (the big orange thing) out.

Step 4:

Put the pennies BEHIND the big spring would be and put the spring back in.

Step 5:

When putting the cocker back on MAKE SURE THE ROD THAT STISKS OUT IS IN THE HOLE THAT IS MADE IN THE MINI SPRING THAT IS LOKATED ON THE TOP OF THE GUN!

After this mod your nerf gun (if you do correctly) will shoot up to a yard farther!

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge
    • First Time Author Contest

      First Time Author Contest

    18 Discussions

    0
    ocicat12
    ocicat12

    4 years ago

    That didn't really help mine

    0
    JackDC2000
    JackDC2000

    5 years ago

    The pennies don't help that much. What will is taking out the air restrictor. This is located in what you call the "compressor." The real name for this is the plunger tube.

    0
    hex4d617474
    hex4d617474

    5 years ago on Introduction

    I just stretched out the spring and removed the air restrictors so I don't think the pennies were really necessary.

    0
    emdarcher
    emdarcher

    Reply 8 years ago on Introduction

    crossfire was the name of mine, it is older and came in blue or red.

    0
    hex4d617474
    hex4d617474

    Reply 5 years ago on Introduction

    According to nerf.wikia.com: "The dual pack is known as Strikefire, where as the single pack is known as the Crossfire."

    0
    johnnys1131
    johnnys1131

    8 years ago on Introduction

    You can make it even better. look at mine popscott3, i think you'll enjoy what other mods i have for mine.

    0
    lil larry
    lil larry

    9 years ago on Introduction

    i usaully use pistols on nerf wars cuz i make em 1 shot kills and this mod rocks! so i powned the other team (LOL).

    0
    popscott3
    popscott3

    Reply 9 years ago on Introduction

    no, I think it is the compresser, Because the air gets copressed in the Compresser. I think the resricter is in the compresser...but I may be wrong!

    0
    moocowdog
    moocowdog

    9 years ago on Introduction

    that gun is soooo pownage. its pretty powerful, even if its not modded

    0
    guitarmonk15
    guitarmonk15

    9 years ago on Introduction

    please, keep the "that's what she said" stuff down. Seriously? Cocker, rod, blow, hole?

    0
    popscott3
    popscott3

    Reply 9 years ago on Introduction

    Well I am not very good at knowing the real ways to say stuff...and I kinda rushed.

    0
    guitarmonk15
    guitarmonk15

    Reply 9 years ago on Introduction

    Oh. Well, umm, I do that a Lot too. If you didn't know what the actual term is, then you can't be critisized for saying a word closely related to the action it does. I thought you were doing it on purpose. Sorry!

    0
    popscott3
    popscott3

    Reply 9 years ago on Introduction

    It's fine...but I even looked up the parts of a gun and it didd'nt have the "cocker" in the labled list.