Introduction: Nerf Gun Mod - Pop-Its Shooter
Here's a Video to see this super easy yet awesome Nerf Mod In Action
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: About This Nerf Mod
This Awesome Nerf Mod will allow you to shoot anything from the nerf gun that is lightweight & fits in the Barrel. My Favourite so far has been The Pop It's party snaps. (So much more fun than throwing them)
Other fun items include.
- Food - Pea, Corn, seeds
- Lollies - Skittles, tic tacs,
Check out This video to see it Shoot Skittles.
Warning- Do not shoot items at any living thing!
Note: You Need to remove the Barrel stem from the Nerf Gun.
There are many tutorials already showing this, so I won't cover this.
Putting foreign objects in the nerf Barrel might cause some of the debris to get into the seals and cause damage.
I recommend that you use an old nerf gun or a Cheap one for this Nerf MOD.
Step 2: The Nerf Dart
This Nerf Mod is super easy.
A Nerf dart is used as a pusher to fire your projectile.
You Need to cut the Nerf Dart and poke a hole in the tip.
Step 3: Connect the Fishing Line
Connect Some fishing line to the end of the Nerf Dart.
Then tie the other end to your Nerf Gun.Note: You Need the fishing line long enough to allow the Nerf Dart tip to
reach the base of the barrel. (see next step)
If you don't have any fishing line you could use some string.
Step 4: Loading & Setting Up
Now Insert The Nerf Dart Tip and carefully use a stick to Ram the dart down the barrel.
The Gun Is now ready to be loaded with your ammunition of choice.
If you like this idea maybe you might like some of my other Nerf Mods