Introduction: Nerf Longshot Light Weight Mod
Are you tired of that bulky berral and having to hold two handles to keep your Nerf Longshot steady. My mod will show you how to make your Longshot lighter, more portable and a little more accurate
The onnly thing you need is a screw driver that fits the screw size and that are able to fit to get to the screw
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
What you want to do is take of the attachable barrel on the end and unscrew all screws.I moded this before I started to post this so im missing some things like the handle.Be sure to make unscrew the screw under the loader for the one shot gun peice of the barrel.
Once you open up the gun it should look like this ( if you remember what I said last step you would understand why your gun has more peices). So what you wnat to do is take out the long barrel at the top. You might have to remove some peices to get the barrel out ( this is really the only thing you want.)
Once you have the barrel out you will have these three little circle things that look like the one at the bottum. These don't do a thing to the gun so it doesn't matter if you keep them on there but i didn't
Now you want to take tape and wrap it around the thinner side of the barre. If you tape the bigger side it will decrease the accuracy and range. Make sure you tape around the very end of the barrel so it's nice and ready for the next step.
Now stick the taped side of the barrelinto the body of the longshot like shown. If you are having trouble getting the barrel to stay in the Longshot just keep on taping around the taped area even more until it is nice firm and sturdy in the Longshot