Nerf Gun Hack Airsoft

12,980

11

20

This nerf gun hack makes a switch shot EX3 into an AWESOME airsoft gun. This is an extremely easy hack which requires absolutely NO MODDING (to the gun) WHATSOEVER!!! And as far as I'm concerned this is the first EX3 mod.
Both barrel parts aren't mine and credits go to whoever made them. 
Oh and I have no idea what the fps is sorry.
Constructive criticism welcome.

First instructable please be nice.

Step 1: Materials

You only need 3 things for this mod:

a dismantled BIC pen tube
a nerf dart minus the velcro, plunger, whistle, etc.
a nerf switch shot EX3 (will probably work with any front-loaded gun)
and a pair of needle nose pliers

Step 2: Barrel

The barrel is the hardest part of this mod but it is fairly easy.

Just pit the pen into the nerf dart, and leave a little bit of the pen sticking out the side you put into the gun.
Crimp the top a little with the pliers so the bullet doesn't fall out

Step 3: Insert Barrel and Your DONE!!!

Just put the barrel piece into the nerf gun's barrel and your ready to shoot

DISCLAIMER
I AM NOT RESPONSIBLE FOR ANYTHING STUPID YOU DO WITH THIS. ANY INJURIES CAUSED WHILE USING THIS GUN ARE NOT MY PROBLEM. My word of advice..... DONT SHOOT YOUR EYES OUT!!!!! WEAR EYE PROTECTION!!

Share

    Recommendations

    • Leather Challenge

      Leather Challenge
    • Arduino Contest 2019

      Arduino Contest 2019
    • Tape Contest

      Tape Contest

    20 Discussions

    0
    None

    You really dont need the nerf dart all you have to do is pit the pen down the barrel and tape around the edges and you can shoot about twice as far as this

    0
    None
    lowe

    8 years ago on Introduction

    READ THIS: If you do the air rrestricter mod, this airsoft gun goes 2 times futher, no joke.I made a magazine for this and i made a perfect hop up

    1 reply
    0
    None
    a_personawaite

    Reply 8 years ago on Introduction

    I tried adding a mag feed but it went down in flames..... it acted more like a Shotgun. give it a try though

    0
    None
    lowea_person

    Reply 8 years ago on Introduction

    When you tried to make the mag, did the bbs shoot out of the mag?

    0
    None
    a_personFractal Art

    Reply 8 years ago on Introduction

    No problem! I actually replaced the barrel with PVC and removed the air restrictor a couple weeks ago. When I re-tried this mod on it it was SCARY. It was like a full powered airsoft gun. I'm thinking about posting it. :)

    0
    None
    a_personcookie38

    Reply 8 years ago on Introduction

    to cookie and milamber this works with ANY barrel loaded nerf gun and I would not recommend using this for a airsoft gun fight because it takes forever to load and shoot and the PVC barrel thing ccant really be posted but I'll try

    what nah i have no stupidity i just sorta did a poor mans hack to my dart tag gun (FYI it somehow started shooting normal neft darts 25 ft.) by adding a light and scope that improves aim now this somebody who does a nerf fight with me at night should watch out. :)

    1 reply