Nickel/Copper Pendant

437

10

Published

Introduction: Nickel/Copper Pendant

I used MrBallengs technique for his granite pendant but the stone didn't fit right. So I put some Copper wire around the inside and ground the stone so it fit within that space. I had to glue the stone in. Also I was able to grind the stone to shape with a belt sander on its side which worked quite well.

Much Thanx to MrBalleng for all his tutorials

Share

    Recommendations

    • BBQ Showdown Challenge

      BBQ Showdown Challenge
    • Backpack Challenge

      Backpack Challenge
    • Stick It! Contest

      Stick It! Contest

    Discussions