Non Metallic DIY Tweezers

Intro: Non Metallic DIY Tweezers

If you need a tool for working with very small magnets or electronics, this is the tool for you.


Step 1: Cut This on a Laser, Then Use As You Wish...

All you have to do is cut the attached Corel Draw file out of wood or acrylic on a laser and you are good to go!

I made it at Tech Shop.

Share

    Recommendations

    • Electronics Tips & Tricks Challenge

      Electronics Tips & Tricks Challenge
    • Optics Contest

      Optics Contest
    • Audio Contest 2018

      Audio Contest 2018

    Discussions