i made a system to control the good operation for individuals sampling pumps.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: The Problem of Individual Pump Sampling for Health and Safety of Workers in Companies
The control of exposure to pollutants of workers is often carried out by sampling on absorbent support with the help of individual pumps. At present only one pump brand offers remote control of their good functionally and this is done by bluetooth, so with very little reach (about 15 meters). At present, it is not satisfactory because the workers equipped with these individual pumps are often far away at distances of more than 200 meters of the control phone and the bluetooth connection is lost.
How to made control of sampling pumps :all companies do not have a Wi-Fi network and it is therefore not possible to propose a control solution based only on the Internet of Things and to call the sampler in the event of a failure. with the LORA it is possible to made a communication module for the measuring of the pump pressure or the flow rate and a module receiver for failure .
Step 2: Assembly and System Design:
The receiver module is able to communicate with bluetooth on a phone application who send SMS to the sampler if the pumps failed.
The long range of this modules permit a good communication, also in bad conditions of transmission example in workshop with many machines and operators dispersed in the workshop.
Materials and Components:
_ your androïd phone
_ tools for welding components and jumpers
_ usb cable
_ 1700 mAh 1S battery
the androïd application was devellopped with mit app inventor
Step 3: TEST AND CONCLUSION
you can see in the video the system working good for all pumps?
Participated in the
First Time Author Contest