Introduction: Origami Crane
I'm going to show you how to make an origami crane it's fairly simple and the thing I first learned
Step 1:
First you need square paper. I chose foil paper because I like the look but anything works
Step 2:
Fold diagonally colored side down (sorry about the pre-existing creases)
Step 3:
Fold in half again...
Step 4:
This part is tricky. Stick your finger in the way back
Step 5:
Then squash
Step 6:
Repeat on the other side
Step 7:
Fold open sides to the middle...
Step 8:
On all sides
Step 9:
Tuck them in...
Step 10:
Once again all sides
Step 11:
Flip flaps up
Step 12:
Fold sides with the hole into the middle
Step 13:
Open up the side flaps and push up the flaps
Step 14:
When you have both, fold the worse one down to make the head
Step 15:
Now lightly tug on the wings until the pointy thing in the middle goes down or just fold down the wings. And your done!