Original Xbox Acrylic Replacement Case

3,399

14

13

Intro: Original Xbox Acrylic Replacement Case

I created this for the original xbox case as a replacement design. I used to have access to a laser and this was one of my more favorite designs. It took a few days of measurements and a bit of acrylic to get it right but it was solid once it was completed.

Share

    Recommendations

    • Halloween Contest 2018

      Halloween Contest 2018
    • Tiny Home Contest

      Tiny Home Contest
    • Audio Contest 2018

      Audio Contest 2018

    13 Discussions

    0
    None
    Mudslagdanielzittel

    Reply 24 days ago

    Hi Daniel, if you click on the download button at the top, it will open a pdf with a link to the CDR file. Thanks

    0
    None
    danielzittelMudslag

    Reply 23 days ago

    but i can download the pdf only when i have premium :/

    this is very bad :(

    0
    None
    WilliamW11v-raze

    Reply 3 years ago on Introduction

    It's two lids, the halo2 logo is under the etched one. When the lights are off, it shows the etching but when they are on, it shows the logo design.

    0
    None
    Water_Cool_FoolMudslag

    Reply 5 months ago

    Could you give me the size of the acrylic cube by chance?

    0
    None
    Water_Cool_FoolMudslag

    Reply 6 months ago

    You wouldn't by chance remember the screw lengths would you by chance?

    0
    None
    MudslagWater_Cool_Fool

    Reply 6 months ago

    I still have a few of those sets around somewhere. Id have to find them to see if I can figure out the length.

    0
    None
    msbeavers2

    2 years ago

    What version of xbox does this fit on? thanks!!