Over Clocking Tutorial for a Friend

A tutorial on how to overclock an ASUS Striker II mobo.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Bios

First you boot into the bios.
If you don't already know:
turn on your computer you will see the Republic of gamers screen. Then just start spamming the delete key.
there you go you should now see this.

Step 2: Extreme Tweaker Menu

Then hit the right arrow key to move to the extreme tweaker menu.
you should see this

Step 3: Ai Overclock Tuner

use the down arrow key to move down one space to "AI overlclock tuner"
When you have it highlighted hit enter.
then move up to Manual and hit enter.

Step 4: FSB

Now you should see this.

Step 5: FSB Cont.

Move down to FSB & mem Config.

Hit enter and you should see the FSB config menu.

Move down to FSB Memmory clock mode.

Hit enter on it and then move down to Unlinked.

Hit enter

Step 6: Ocing

Now you can mess with the FSB and the Mem frequency.
To determine what to move it to you have to do some math first.
In this case look at the FSB its a 1333 right now. Because i have a quad core i have to divide that by 4 to get the FSB thats roughly 333. Then you multiply by your core multiplier in this case its 8 then you have 2666. just move the decimal until its one away from the first number so its now 2.66. So use that to get the GHZ you want. Same with the ram but ram has less of a threshold than ur CPU so don't mess with that. Keep it what is.

Step 7: Finish

Now escape out until it asks you if you want to exit. Say no then hit f10 and say yes. your pc will now boot up and have fun with your newly OCed mobo. (If it messes up just ask me how to clear your cmos ok)

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest

    3 Discussions

    0
    None
    admin

    10 years ago

    This is a great Instructable, but you need to add a main image of the final project to the intro step. Please do that and leave me a message when you have so that we can publish your work. Thanks!

    0
    None
    ReCreate

    10 years ago on Introduction

    Any idea on how i can overclock my dell inspiron 6000, it runs at 1.5GHz, my goal is 1.7GHz

    0
    None
    Muscelz

    10 years ago on Step 1

    1st hd. Seagate Barracuda 7200.9 120 GB Hard Drive 2nd hd. Barracuda 7200.10 SATA 3.0Gb/s 500-GB Hard Drive 3rd hd. WD Caviar SE 200GB Hard Drive soz im bored, i decided to see what u had