This is a really quick project for getting acquainted with a CNC, perfect for a makerspace and great for the holidays.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Carve It
Use easel to generate gcode for this design by opening it here: https://www.inventables.com/projects/easy-bevel-design
I used a 90 degree v-bit for this project to get that beveled edge.
Step 2: Paint It
Nothing left to do other than paint it! Just took a can of paint I had lying around and dipped it as far as the tree would go.