Intro: Paper Hang-glider for a LEGO Man
This is an awesome hang glider that is designed for a legoman it flies very well. It should take only five minutes to complete. First instrustable, Please rate and comment. Flies extremely well!!!
Step 1: Step #1
Get a piece of regular printer paper,(mine has already been folded up ignore it)
Step 2: Step #2
Fold the paper diagonally along the edge then unfold and fold the opposite way, then unfold again
Step 3: Step #3
This step is hard to explain so just follow the pictures
Step 4: Step #4
Fold down the nose until the tip touches the seam thats visible. Then fold up the tips so they are about 1 1/2 inches high like shown.
Step 5: Step #5
First tape down the nose to the seam, then tape the tips so they're more sturdy. Fold the wing tips as shown.
Step 6: Step #6
Now get a piece of fishing line thats 6 1/2 inches long and tape the ends to the vertical flaps as shown, make sure its nice an tight so your legoman does'nt die!!!
Step 7: Step #7
Finally, now find a way to attach the legoman to the fishing line. the harness I put on his legs was for display purposes so its not necessary only the neck one is necessary. Good luck and have fun flying it, please rate and comment.