Introduction: Parking Blinking Car House
- Makers: Deepak and kushal
- Location: Banjarapalya E4D Maker space.
We made this project at Banjarapalya E4D Makerspace, for The Instructables Build Night On Circuit Scribe. We enjoy this build night and it was good.
- Conductive ink pen
- 9V Batter
- NP N transistor
- SP ST switch
- plastic cover
- A4 Sheet
- Aluminum sheet
3. Fe vi stick
Step 1: Make the House
Take a cardboard and cut it like this and make the house. After that take the marker and draw the window and cut it with the help of scissor as shown in images.
Step 2: Sticking the Aluminum Sheet and Plastic Cover
Take the Aluminum sheet and plastic cover and stick it as shown in images. (Aluminum sheet help to reflect the light)
Step 3: Planing the Circuits and Fix the Components
Next take other A4 sheet and plan the circuit and draw the circuit. After that fix the all components with the help of steel pad as shown in images. And stick the trees.
Step 4: Put the House and Toy Car
After fixing the components take the House and car module and put it on the circuit as shown in the images.
Step 5: Your Parking Blinking Car House Is Ready
Finally your Parking Blinking Car House is ready it will look like this.