Pavilion

Published

Introduction: Pavilion

Conceptual pavilion that can be moved around the city for exhibition of arts and information, during events such as ultra and art Basel.

Step 1: Concept

Step 2: Grasshopper File

Grasshopper file and stl file ready to print.

Step 3: Model Process

time lapse of 3D print with a makerbot z18 about 15 hours of print.

Step 4: 3D Print

Print took about 15 hours, if printed on its vertical axis rather than horizontal the print time is reduced by half the time. Also there are a lot less supports if these technique is used.My nice ended up using the pavilion as a Halloween helmet.

Share

    Recommendations

    • Water Contest

      Water Contest
    • Oil Contest

      Oil Contest
    • Clocks Contest

      Clocks Contest

    2 Discussions