Introduction: Pikachu T-Shirt
This Instructible is to show you how to make a t-shirt with a pikachu tail.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: What You Need
You will need:
Iron On Prints (+printer and iron )
Old yellow Tee
(I Used Photo shop elements to draw the tail)
Scissors (to cut the Iron on's)
Make sure you read the instructions several times before you iron or cut or print so you can get it right.
I had to read it over and over to avoid mistake making.
Step 2: Design
Start by drawing the tail.
I tried to make my tail as big as I could get it to fit on a4
Once you have drawin your tail do a test print
Step 3: Print
Once your happy print off your design then cut out leaving the edges rounded.
Now your ready for ironing.
Step 4: Ironing & Finishing
This is the hard part
MAKE SURE YOU READ THE INSTRUCTIONS BECAUSE SOME IRON-ON'S HAVE DIFFRENT INSTRUCTIONS
Do as your directed according to your instructions.
then you now have a pikachu t-shirt
Participated in the