Enjoy this cardboard sheet Pinball Machine.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Take Cardboard
Take Rectangle shape cardboard sheet as per your dimensions.
Step 2: Draw Graphics
Draw Graphics as per your layout of pinball game.
Step 3: Cut Two Wooden Paddles
Cut Two wooden paddles in shape of picture.
Step 4: Take Two Dc Motor
Take two 12 volt dc motor and stick with cardboard.
Step 5: Install Two Paddles
drill holes in wooden paddles and connect with dc motor.
Step 6: Make Spring
Make spring of rubber and stick with wooden plate.
Step 7: Stick Body Parts
stick all body cardboard to this pinball machine.
Step 8: Stick Cardboard
Step 9: Make Objects
stick wooden to cardboard.
Step 10: Rubber Band
boundary of rubber.
Step 11: Remote Control
Make Remote controlled switch box.
Step 12: Connect to Pinball Machine
connect this to pinball machine.
Step 13: Make Start Point
Make a start point through cardboard.
Step 14: Enjoy Pinball !
Participated in the
Trash to Treasure