# Plane That Flies Forever Uranus Arc III

1,128

2

## Introduction: Plane That Flies Forever Uranus Arc III

This fighter jet flies for the longest time and is very fast.

This is made with a A4 paper and some origami skills that even an amateur can easily learn.

get excited and get ready to fly high!!

### Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

## Step 1: Materials Needed

1.A A4 sized paper..

2.Some Sketch pens to make it look awesome.

3.Scissors

Start with a regular piece of rectangle paper that's 8.5 x 11.0 inches (215.9 x 279.4 mm).

## Step 2: The Initial Foldings..

1.Fold the paper in half lengthwise.

2.Unfold.

3.Fold the top two corners to the center as shown in figure 3.

## Step 3: The Chasis...

1.Fold the left and right diagonal edges to the center as illustrated in image 1.

2.Fold the top point to the center of the bottom edge as illustrated in image 2.

3.Turn the paper over as illustrated in image 3.

4.Fold the top two corners down so that the edge of the flaps are parallel to the bottom edge as illustrated in image 4.

## Step 4: The Confusing Fold..

1.While folding the top part down, lift up the flap in the back..as illustrated in image 1.

2.Flatten it and it should like the 3rd image.

## Step 5: The Wings..

1.Turn the paper over.

2.Fold the left half to the right as illustrated in image 1.

3.Do the same on both the sides.

4.Fold the wing as shown. Make sure the bottom edge of the wing lines up with the bottom edge of the base.

## Step 6: The Beak..

1.To give it a fighter plane like look fold the beak as illustrated in image 1.

PS:- I made a swan like end.

## Step 7: The Design..

Using the scissors give the desired look and feel.But make sure that the fighter plane remains aerodynamic and symmetric.

## Step 8: Final

The final plane should look like this..Depending on how you have cut it ..It may even return to you after you throw it..Like and Share Peace

Participated in the
Make It Fly! Contest 2017

Participated in the
Invention Challenge 2017

Participated in the
Makerspace Contest 2017

2 201
164 11K
20 2.9K