Practical Necklace

Introduction: Practical Necklace

This Necklace started as an idea from the web
Thank you for looking

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

I Made It Photo Contest

Participated in the
I Made It Photo Contest

Be the First to Share

    Recommendations

    • Sculpting Challenge

      Sculpting Challenge
    • 3D Printed Contest

      3D Printed Contest
    • Motor Vehicle Contest

      Motor Vehicle Contest

    6 Discussions

    0
    shannonlove
    shannonlove

    8 years ago on Introduction

    Great idea. This is one of those concept that you could take commercial. This would be great as an emergency/survival tool if nothing else.

    0
    Plan B
    Plan B

    Reply 8 years ago on Introduction

    Thanks for your reply
    Plan B

    0
    l8nite
    l8nite

    9 years ago on Introduction

    looks cool, what did you use for the necklace? how is the cross attached to the necklace ?

    0
    Plan B
    Plan B

    Reply 9 years ago on Introduction

    I welded a small nut 1 to 2 mm on top and shaped it round with a dremel.
    But you could drill thru the bit for the string

    0
    Plan B
    Plan B

    9 years ago on Introduction

    The bits are regular bits available in any hardware store.
    I welded 3 bits together with a mig welder for this project.

    0
    Phil B
    Phil B

    9 years ago on Introduction

    Are the screwdriver bits available pre-formed as a cross? I have not seen that before.