Project ROBOT: Part I



Introduction: Project ROBOT: Part I

Hi! I'm Andrey, 20 y.o. and I'm studying industrial electronics at the NTU "KhPI". Well...

Hi! In this instructable I will show you how to make an Arduino 4wd robot. In this part we will talk about the platform for the robot.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Make a Draft

I've had such a platform (a smaller one) and decided to make something bigger, so I drew a draft of the platform that I'd like to have. You can see it in the second picture. Not really beautiful. And not really ugly. That's ok.

Then you will need to take a sheet of plastic, glue the draft to it, cut everything out and drill the holes.

You will get something like a platform in the 3rd picture.

P.S. You can see the whole video by this link:

P.P.S. Subscribe)

Step 2: Connect Everything to the Platform

Now we are taking everything and connecting it to the platform with the help of plastic buckles.

Step 3: We're Done!

We have made something like this! Congratulations!

In the next part we will talk about the electronics.

Thank you for reading this instructable!

See you soon! Bye!

P.P.P.S. You can also subscribe for more videos -

Be the First to Share


    • Magnets Challenge

      Magnets Challenge
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest