Project ROBOT: Part II

Introduction: Project ROBOT: Part II

About: Hi! I'm Andrey, 20 y.o. and I'm studying industrial electronics at the NTU "KhPI". Wellcome to my Instructables-page, hope you'll find here something interesting and helpful! 💥🤖When I get 100subs ...

Hi! This is the second Instructable og making an Arduino 4wd robot.

In this part we will talk about the electronics.

P.S. You can see the whole process of making this robot by this link:

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Components

You will need:

  • Batteries
  • jumper wires
  • HC-05/HC-06 bluetooth module

Step 2: Circuit

Now connect everything like it's done in the schematics. You will get something like this.

Step 3: We're Done!

We have made something like this! Congratulations!

In the next part we will talk about programming.

Thank you for reading this instructable!

See you soon! Bye!

P.P.S. You can also subscribe for more videos -

https://www.youtube.com/channel/UC84lODzF_czXKVoNp...

Be the First to Share

    Recommendations

    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest
    • Fix It Contest

      Fix It Contest

    Discussions