Intro: Pumpkin Voodoo Doll
I've created a Pumpkin-Voodoo-Doll. It will be hung up in my office.
Step 1: Paper Pattern
I printed paper patterns to set the size. The arms and legs are made of a rope.
Step 2: Sewing
I transferred the paper patterns to the fabric (fleece) and sewed it together. During the sewing process I lost the traditional pumpkin shape in some places; it looks more like Wee Bee Little now. And there we have its name!
Step 3: Assembly
After turning the inside out, filling and assembling the Wee Bee Little with the remaining fabric and some cotton, I tied a rope (hangman's noose). The neck is supported by a cardboard roll.
Step 4: 3D Prints
I've 3D printed the eyes, nose, mouth and the stem. Later I decided to omit the nose and painted the eyes, mouth and stem with black and red acrylic paint. There is a nail in the right eye. The eyes are glued on and the mouth is attached with safety pins.
In addition, the hands were put in black chains and I added a few seams.
Step 5: Finale
To pin the needles I stuck - with masking tape covered - small cork boards to the hands and feet and hung a larger one around the neck. The text is exemplary. I will replace it for my purposes.
This is an entry in the
Halloween Contest 2018