RC Plane Made From a Broken RC Helicopter

This the plane I made from a broken helicopter I had.

Step 1: The Electronics

I took the electronics out of a broken helicopter. They will be glued to a balsa wood glider

Step 2: The Plane

Here's some pictures of the glider and the electronics

Step 3: Installing the Electronics

Hot glue the receiver in the middle along with the battery. glue the motors in the front on each side of the wing. The propellers will be installed last. It's inferred controlled and can only be flown indoors



    • Trash to Treasure

      Trash to Treasure
    • Arduino Contest 2019

      Arduino Contest 2019
    • Tape Contest

      Tape Contest