RECONDITION CONTROL CNC ACRAMATIC 2100

570

10

About: DESING AND MANUFACTURING SOFTWARE AUTOCAD,MASTERCAM,INVENTOR PROFESIONAL,RHINOCEROS, FUSION 360, REVIT, CNC, MAQUINAS HERRAMIENTAS, REPAIR CNC CINCINNATI Y FAGOR :p

RECONDITION CONTROL CNC ACRAMATIC 2100

MAS INFO

CADCAMCNC.WEEBLY.COM :p

Step 1: DISMANTLING THE UNIT

TO START THE RE-CONDITIONING OF THE DISARMAMENT CONTROL UNIT EVERYTHING AND MAY PERFORM AN EXTERNAL INSPECTION OF EACH OF THE UNITS AND PLATES

PARA COMENZAR EL REACONDICIONAMIENTO DE LA UNIDAD DE CONTROL DE DESARMARA TODO Y SE POCEDERA A REALIZAR UNA INSPECCION EXTERNA DE CADA UNA DE LAS UNIDADES Y PLACAS

Step 2: CHECKING AND INSPECTING CARDS

THE STARJETAS THAT DO NOT WORK WILL BE VERIFIED TO REPLACE IT OR ONLY THE CMOS WILL BE UPDATED SO THAT IT MAY BE REUSE

SE VERIFICARAN LA STARJETAS QUE NO FUNCIONEN PARA PODER REMPLAZARLA O SOLO SE ACTUALIZARA EL CMOS PARA QUE SE PUEDAN REUTILIZAR

Step 3: CARD RECONFIGURATION

THE CARDS WILL BE REPAIRED AND THE BIOS WILL BE CHARGED TO BE USED NOT TO BUY A NEW

SE REPARARAN LAS TARJETAS Y SE CARGARA EL BIOS PARA PODER UTILIZARLA NO COMPRAR UNA NUEVA

Step 4: CARD IS DAMAGED BY a NEW CARD TO RUN THE CONTROL

SE SUSTITUYE LA TARJETA DAÑADA POR UNA NUEVA PARA PONER A FUNCIONAR EL CONTROL

CARD IS DAMAGED BY A NEW CARD TO RUN THE CONTROL

Step 5: REPAIR AND REPLACEMENT OF ACRAMATIC 2100 CONTROL

REPAIR AND REPLACEMENT OF ACRAMATIC 2100 CONTROL

REPARACION Y REACONDICIONAMIENTO DE CONTROL ACRAMATIC 2100

EN EL VIDEO SE MIRA TODO EL PROCESO :p

Share

    Recommendations

    • Plastics Contest

      Plastics Contest
    • Make it Glow Contest 2018

      Make it Glow Contest 2018
    • Optics Contest

      Optics Contest

    10 Discussions

    0
    None
    chaudn486

    4 months ago

    an accident, now I have no control over the keyboard and mouse, and the A2100 program is faulty

    0
    None
    gatiel

    4 months ago

    a picture of the leds on the back of the cnc control

    0
    None
    gatiel

    4 months ago

    What is the problem with your cnc? if you can send me an image of your hdd to verify but I need to know the problem of your cnc

    0
    None
    chaudn486gatiel

    Reply 4 months ago

    I need the hdd replace my machine or sent to repairs

    DC2F429C-5518-4A30-A602-A55A366B1FFF.jpeg45BDE0AF-0A82-4B6D-8AC3-8CF42B6CBD81.jpeg