Hi! Sorry I was gone so long. I will make it up to you with this cute little heart!

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Materials

You will need:

-A loom in a squared configuration
-A hook
-12 rubber bands (I will use caramel)

Step 2: Placing the Bands

First,make sure ALL the bands you use in the instructable are DOUBLED-OVER.(Pic 1) Then,with the red arrow facing you, place the bands in the order in show you. (Pics 2 to 6).

Step 3: Cap Bands and Horizontal Bands

Add cap bands at where my hook is pointing. Make sure the cap bands have FOUR rings.

Then,double a band and add it to the SECOND ROW of three pegs.

Step 4: Hooking

Hook the bands like I show in the pictures above.

Step 5: Finishing Off

Use your hook and carefully remove the heart from the loom. DO NOT REMOVE THE TOP PIN. Instead stick your hook inside the pin and pull all the bands off.

Pull one band through all the bands on you hook and make a slip knot. Hide the slip knot in your heart and your done!

HAPPY LOOMING!!! :D