Introduction: Rainbow Loom Triple Single Bracelet
I hope it works for you!
Step 1: Step 1: Gather Your Equipment
You will need:
- a loom
- 12 blue bands
- 12 green bands
- 12 purple bands
- 12 white bands
- 1 white finishing band
- an "s" or " c" clip
Step 2: Step 2: Placing the Bands
Make sure that your loom board is how it looks in the picture. Place bands over each other like so.
Step 3: Step 3: Still Placing Bands
Continue step 2.
Step 4: Step 4: Nearly Done Placing the Bands
Place triangles as shown in the picture.
Step 5: Step 5: More Triangles
Place more triangles.
Step 6: Step 6: Starting to Loop
Hook last coloured bands to the pegs in front of each band.
Step 7: Step 7: Looping
Continue the pattern shown in last step.
Step 8: Step 8: Finishing Off
At the top of the board, pull the link to the last peg.
Step 9: Step 9: Getting Ready for Slip Knot
Pull the other link to the same peg as last link.
Step 10: Step 10: Slip Knot
Push your hook into the groove and pull the last white band through and make a slip knot.
Step 11: Step 11: Pulling It Off
Hold slip knot firmly and carefully pull the bracelet off the loom.
Step 12: Step 12: Applying the Clip
Apply the "s" or "c" clip and have fun wearing it!
Step 13: Step 13: Thank You!
Thanks for watching! ???