Raspberry Pi B+ LEGO Case (Smaller Footprint)

Most Raspberry Pi Lego cases on the net had a 13x9 lego-dot footprint.

I wanted to make mine smaller.

I present to you the 12x9 lego-dot Rasperry Pi B+ LEGO Case.

It fits the board perfectly, no movement whatsoever!

You will need two unusual pieces - one of which I have never seen before (last photo on this page)

Step 1: More Photos

I tried to give a detailed photo of every important point.

The parts I used were the ones' I had, not the best for the job.

I'll try to meddle with the cover, maybe find some parts with holes in them for ventilation.

And maybe order parts to better colour-match the whole thing.

If there are any questions or anything that needs explanation or just a better photo - I'll be happy to help.

Good luck,


2 People Made This Project!


  • Growing Beyond Earth Maker Contest

    Growing Beyond Earth Maker Contest
  • Stone Concrete and Cement Contest

    Stone Concrete and Cement Contest
  • Sew Tough Challenge

    Sew Tough Challenge

4 Discussions


4 years ago on Introduction

I don't recall seeing this done before, which kind of surprises me. It's such a great idea!

1 reply

Reply 4 years ago on Introduction

Hi, Thanks!
There are a number of Pi cases made out of lego,
most of them are not for the newer, B+ model, and all the ones' I have found are slightly larger.
The size annoyed me mostly because of the uneven number of lego-blocks (9x13), not because of the minor size difference.
I managed to get it down to 9x12