Intro: Real Life Angry Birds
The video of this project:
The materials you need:
- Acrylic colors
- Polystyrene balls
- Wood sticks
- A piece of wood that looks like slingshot
- Rubber band
- Piece of paper
- Super glue
Step 1: Model the Birds
Use the fimo to model the birds.
I made 4 types of birds: Red(The normal bird), Black(The bomb), Blue(The tiny bird) and the Yellow(The "pyramid" bird).
Model the red bird: just make a ball from the fimo.
Black bird: make it little bit bigger than the red one.
Blue bird: make it little bit smaller than the red bird.
Yellow bird: model a pyramid from the fimo.
Step 2: Harden the Birds
Put the birds in your oven to 30 minutes in temperature of 1100C.
Step 3: Paint the Birds
First, make 2 layers of color.
Second, make a circle of light color in the bottom of each bird.
And third, paint the eyes, the beak and the plumes.
Step 4: Make the Slingshot
First, find a wood that looks like slingshot.
Then cut some leftovers of wood.
After that, connect a rubber band, as shown in the picture and tape it.
Finally, tape a piece of paper to the rubber band.
Step 5: Make the Pigs
To make a king pig, model a crown from the fimo:
- Make a small ball
- Transform it into a cylinder
- Cut the cylinder for fourths but only to the half of the height
- Take the pieces out from the middle and make it look like a crown
Step 6: Play It!
Take the wood sticks and build a building. Put pigs inside the building and take the birds you need.
Shot the birds from the slingshot and start playing. Enjoy!