Remote Control Your Lights

Hi guys!

Today we are going to make Remote Control The Lights!

Are You Lazy?

Do you want to turn off the lights, when you are in the bed?

DO NOT LEAVE THE BED!!..:)

Let's start!!

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

You can also see the my other light project; >>> Turn On The Lights With Clap <<<

Step 1: What Will We Use?

We will use;

1. 2 x Arduino
2. Joystick
3. 2 x Nrf24l01
4. 1 or 2 Mini Battery
5. Servo Motor

Step 2: Setup the Parts;

First of all, after the coding paste the mini breadboard to wall under the switch. After that paste the nrf24l01 to next to the switch, fix the servo to switch like in the photos. Fix strongly..

For command part; You can use a normal breadboard. Fix the parts like in the photos.

Step 3: Connections;

For Switch Part;

nrf24l01 to Arduino

• GND 1 ---- GND

• VCC 2 ---- 3.3V

• CE 3 ---- 7

• CSN 4 ---- 8

• SCK 5 ---- 13

• MOSI 6 ---- 11

• MISO 7 ---- 12

• IRQ 8 ---- not connected

Servo to Arduino

Signal Pin to D5

5v to 5v

Gnd to Gnd

For Remote Control Part;

nrf24l01 to Arduino
• GND 1 ---- GND

• VCC 2 ---- 3.3V

• CE 3 ---- 7

• CSN 4 ---- 8

• SCK 5 ---- 13

• MOSI 6 ---- 11

• MISO 7 ---- 12

• IRQ 8 ---- not connected

Joystick to Arduino

Gnd to Gnd

5v to 5v

vrX to A0

Step 4: Coding;

You can download the Arduino code from this link;

>>> Download The Arduino Code <<<

PLEASE FOLLOW ME AND VOTE MY PROJECTS FOR MORE USEFUL PROJECTS. THANK YOU..:)

Step 5: Youtube Video;

Please Subscribe Our Youtube Channel For More Useful Projects..:)

You can subscribe from there;

>>> Subscribe Me On Youtube <<<

We are expecting your comments..:)