Introduction: Remote Control for Light Easy Way
It is very simple way to make light or fan remote I use RGB LED strip controller & 12v relay.
You can watch Project Video here
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Needs
1 - rgb led strip controller
2- ply wood
3-12 v relay
4- connector ( optional)
5- bulb holder ,wire etc
glue controller & relay on a plywood
connection is very simple I connect rgb led controller blue pin to 12v relay
when blue switch press on the remote relay will on and bulb will glow
you can use three relay for red ,green blue channel
for watch making videoclick here