Replacing an Engine Mount (Hyundai Trajet)

Published

Introduction: Replacing an Engine Mount (Hyundai Trajet)

About: Update 12 September 2017: A very special thanks to Sam Elder, a manager here at Instructables, who tracked down the cause of my lost publications and fixed the issue. Take a bow Sam!

As part of the proactive maintenance program for vehicles, I went about replacing the 16 year old front mount in this Hyundai trajet.

Step 1: Removing the Old Mount.

The mount is held by four 14mm bolts. I used powerlube 5 Minutes prior to removal to make my life easier. I need a really long socket extension to remove the bolts.

In 10 minutes I had the old one out.

Step 2: Comparison.

The old mount is in pretty good shape but it's still old and the new one will be in shortly.

Step 3: Installing the New and Completion!

The installation is the reverse of removal. Pretty straight forward 20 minute job!

Share

    Recommendations

    • Oil Contest

      Oil Contest
    • Water Contest

      Water Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    Discussions